Samsung 750 Series User Manual page 69

I
Securing the TV to the Wall
(depending on the model)
• Accessaries
Holder-TV
~
ScrewG)(M4 X L16)
~
Screw(2) (M8 X L19)
• To prevent the TV from falling (According to the TV type, see drawing annex)
1. Unscrew a screw attached on the back of your TV, then connect the Holder-TV [1 or 2] with the screw through the hole.
III
Make sure to only use the supplied screws.
III
When you install the wall-mount, refer to the "Securing the TV to a wall or Cabinet" in the TV manual for installation type.
[®
Type]
[®
Type]
r - - - - - - - -
[CD
Type] - - - - - - - - - ,
2. Firmly fasten the screws to the wall or cabinet where the TV is to be installed. Tie the TV-Holder attached to the TV and the screws
fastened on the wall or cabinet so that the TV is fixed.
III
Purchase the screws to be used on the wall or cabinet separately.
III
Install the TV close to the wall so that it does not fall.
III
When attaching the TV to the wall, tie the cord level with the ground or slanted downwards for safety purposes.
III
Confirm that the cord or link does not come loose frequently.
III
Before moving the TV, separate the connected cord first.
Wall
III
Use the Wood screw (sold separately) from the size M4 X L20.
3. Verify all connections are properly secured. Periodically check connections for any sign of fatigue or failure. If you have any doubt
about the security of your connections, contact a professional installer.