Maintenance - Black & Decker RP250K Instruction Manual

ENGLISH
ROUTER BITS (FIG. O)
DESCRIPTION APPLICATION
• Straight bit (1) • Grooves and rebates
• Trimming bit (2) • Trimming laminates or hardwood;
• Rebating bit (3) • Rebates on straight or curved workpieces
• V-grooving bit (4) • Grooves, engraving and edge bevelling
• Core box bit (5) • Fluting, engraving and decorative edge moulding
• Cove bit (6) • Decorative edge moulding
• Ogee moulding bit (7) • Decorative edge moulding
• Rounding over bit (8) • Rounding over edges
• Dovetail bit (9) • Dovetail joints
• Chamfer bit (10) • Chamfer edges
ACCESSORIES
The performance of your tool depends on the accessory used. Black & Decker and Piranha accessories are
engineered to high quality standards and designed to enhance the performance of your tool. By using these
accessories you will get the very best from your tool.

MAINTENANCE

Your tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous
satisfactory operation depends upon proper tool care and regular cleaning.
WARNING:
Before performing any maintenance, switch off and unplug the tool.
• Regularly clean the ventilation slots in your tool using a soft brush or dry cloth.
• Regularly clean the motor housing using a damp cloth. Do not use any abrasive or solvent-based cleaner.
PROTECTING THE ENVIRONMENT
Separate collection.
This product must not be disposed of with normal household waste.
Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do
not dispose of it with household waste. Make this product available for separate collection.
Separate collection of used products and packaging allows materials to be recycled and used again.
Re-use of recycled materials helps prevent environmental pollution and reduces the demand for
raw materials.
Local regulations may provide for separate collection of electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
accurate profiling using a template
24
SERVICE INFORMATION
Black & Decker offers a full network of company-owned and authorized service locations. All Black & Decker
Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool
service. Whether you need technical advice, repair, or genuine factory replacement parts, contact the Black & Decker
location nearest you.
SPECIFICATIONS
RP250K/RP250BE
VOLTAGE
AR 220V ~ 50Hz
B2C 220V ~ 50Hz
B3 120V ~ 60Hz
B2 220V ~ 60Hz
BR 127V ~ 60Hz
POWER 1200W
NO-LOAD SPEED 8000-27000 RPM
ENGLISH
25