Start The System; Monitor Settings - Cisco TelePresence SX10 Quick Set Installation Manual

Start the system

1. The SX10 starts up automatically when the power is connect. If it does not start
automatically, push the power button.
2. The power button's LED lights up when the system starts up.
3. Follow the instructions on the on-screen wizard.
For further information on configuring your video system, download the Getting
Started Guide from www.cisco.com/go/sx-docs.
If there is a problem with the start up, the power button's LED turns red. Please
contact support for assistance.

Monitor settings

To achieve the best possible synchronization of audio and video, check the monitor
settings.
• Choose the 'Game Mode' setting, if the monitor is equipped with it. It is specifically
designed to help reduce the response time and to reduce any delay.
• Switch off any additional audio processing effects, as these may lead to
nonsynchronized audio and video.
Camera LED
Internal microphone,
and infrared sensor for
the remote control
6
Power button
and LED