Loading Bottom Rack - KitchenAid KUDS01IL Use And Care Manual

Kitchenaid undercounter dishwasher use & care guide kuds01il
Hide thumbs Also See for KUDS01IL:
Table of Contents

Advertisement

Available languages

Available languages

To adjust the back half
1. Grasp the tip of the tine that is in the tine holder.
2. Gently push the tine out of the holder.
3. Lay the tines down, toward the center of the rack.
SURE-HOLD™ light item clips
The light item clips hold lightweight plastic items such as cups,
lids, or bowls in place during washing.
To move a clip
1. Pull the clip up and off the tine.
2. Reposition the clip on another tine.
Adjustable 2-position top rack
You can raise or lower the top rack to fit tall items in either the top
or bottom rack. Raise the top rack to accommodate items up to
9 in. (22 cm) in the top rack and 13 in. (33 cm) in the bottom rack,
or lower the top rack to accommodate items up to 11 in. (28 cm)
in both the top and bottom racks. Adjusters are located on each
side of the top rack.
To raise the top rack
Lift the rack on either, or both, sides until the rack is level.
NOTE: The top rack adjusters MUST be level.
To lower the top rack
Press both rack adjusters and slide the rack back to its
original position.
8
Removable Top Rack
The removable top rack allows you to wash larger items such as
stock pots, roasters, and cookie sheets in the bottom rack.
IMPORTANT: Remove dishes prior to removing upper rack from
dishwasher.
To remove the top rack
1. Pull the rack forward slightly to access track stops.
2. To release, press the button of the track stop finger grip and,
pull track stop out of the track.
3. After removing both track stops, pull rack out.
To replace the top rack
1. Place the rollers on each side of the rack into the rack tracks
and push the rack back.
2. While pushing the button in the center of the track stop finger
grip, insert track stop into rack and slide until it locks into
place. Release the button.
3. Pull on the track stop to make sure it is locked into place.
4. Repeat on the other side.

Loading Bottom Rack

The bottom rack is designed for plates, pans, casseroles, and
utensils. Many items, up to 13 in. (33 cm) tall, fit in the bottom
rack. (See recommended loading patterns shown.)
NOTE: The features on your dishwasher rack may vary from the
drawings shown.
10 place setting
12 place setting

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents