Installation Dimensions Of Locking Bolt; Installing The Range With The Anti-Tip Device - Miele HR1421 Installation Instructions Manual

Anti-tip device
Installation dimensions of
locking bolt
Anti-tip device, front view
Model
HR 1421 29 15/16"
HR 1622 (760 mm)
HR 112x
HR 192x
HR 113x 35 15/16"
HR 193x (913 mm)
HR 195x 47 15/16"
(1218 mm)
74
Width X
3 13/16"
(97 mm)
3 13/16"
(97 mm)
3 1/4"
(82 mm)
Installing the range with the
anti-tip device

Wear safety shoes and gloves.
The anti-tip device should be installed
at the bottom rear of the range at the
midpoint of the width.
 Measure the installation space for the
range close to floor level.
 Mark the wall at the middle of the
space width.
 Position the notch of the anti-tip
bracket on the wall marking.
The anti-tip device must fit tightly on
the floor or the wall.