Before Using Your Dishwasher - KitchenAid KUDI01DL Use And Care Manual
Undercounter dishwasher
Hide thumbs
Also See for KUDI01DL:
- Consumer reference manual (20 pages) ,
- Use & care manual (19 pages) ,
- Dimension manual (1 page)
Table of Contents
Advertisement
Before Using Your Dishwasher
Tip Over Hazard
Do not use dishwasher until completely installed.
Do not push down on open door.
Doing so can result in serious injury or cuts.
Electrical Shock Hazard
Electrically ground dishwasher.
Connect ground wire to green ground connector
in terminal box.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
Install where dishwasher is protected from the elements.
Protect against freezing to avoid possible rupture of fill valve.
Such ruptures are not covered by the warranty. See "Storing"
in the "Dishwasher Care" section for winter storage
information.
Install and level dishwasher on a floor that will hold the
weight, and in an area suitable for its size and use.
Remove all shipping plugs from hoses and connectors (such
as the cap on the drain outlet) before installing. See
Installation Instructions for complete information.
4
- Quick Links:
- Parts and Features
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the KUDI01DL and is the answer not in the manual?
Questions and answers
CONTROL LOCK LIGHT REMAINS ON AND UNIT WILL NOT LOCK DOOR UPON ATTEMPTING TO BEGIN CYCLE AND GO INTO OPERATING MODE
The control lock light remains on because the Control Lock feature is activated. When this feature is on, the dishwasher controls are locked, preventing operation. Additionally, the KitchenAid KUDI01DL unit does not lock the door when starting a cycle because the door latch mechanism is separate from the control lock function.
To disable the Control Lock and allow normal operation:
1. Press and hold the ENERGY SAVER™ Dry System control for 4 seconds until the Control Lock light turns off.
2. Ensure the door is firmly closed and latched.
3. Restart the cycle as needed.
This answer is automatically generated