Setup Menu; Setting The Time; Using The Sleep Timer; Setting The On/Off Time - Samsung 450 series User Manual

Speaker Select
(External Speaker / TV Speaker)
A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver. In
this case, set the 1V to
External Speaker.
~ When Speaker Select is set to External Speaker, the
volume and MUTE buttons will not operate and the
sound settings will be limited.
~ When Speaker Select is set to External Speaker, you
should use these settings.
• TV speaker: Off External speaker: On
~ When Speaker Select is set to TV Speaker, you
should use these settings.
• TV speaker: On External speaker: On
~ If there is no video signal, both speakers will be mute.
SPDIF Output
SPDIF (Sony Philips Digital Interface) is used to provide digital
sound, reducing interference going to speakers and various
digital devices such as an NV Receiver/Home Theater.
• Audio Format:
During the reception of a digital1V
broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM or Dolby Digital.
~ By connecting to 5.1 ch speakers in a dolby
digital setup, maximize your interactive 3D sound
experience.
• Audio Delay:
Correct audio-video mismatch, when
watching 1V or video, and listening to digital audio
output using an external device such as an AV receiver
(Oms - 250ms).
Sound Reset
Reset all sound settings to the factory defaults.
I
Setup Menu
I
Setting the Time
(8
MENU
rID ~
Setup
~
Time
~
ENTER G
Time
~ The current time will appear every time you press the
INFO
button.
Clock: Setting the clock is for using various timer
features of the TV.
~ If you disconnect the power cord, you have to set
the clock again.
Clock Mode:
Set up the current time manually or
automatically.
- Auto:
Set the current time automatically using the
time from a digital channel.
~ The antenna must be connected in order to set
the time automatically.
- Manual: Set the current time manually.
~ Depending on the broadcast station and signal,
the auto time set up may not be correct. In this
case, set the time manually.
Clock Set:
Set the
Month, Day, Year, Hour, Minute
and
am/pm.
~ Available only when Clock Mode is set to
Manual.
~ You can set the month, day, year, hour and minute
directly by pressing the number buttons on the
remote control.
DST (Daylight Saving Time) (Off / On):
Switches the
Daylight Saving Time function on or off.
~ This function is only available when the Clock
Mode
is set to
Auto.
Time Zone: Select your time zone.
~ This function is only available when the Clock
Mode
is set to
Auto.
I
Using the Sleep Timer
(8
MENU lID
~
Setup
~
Time
~
Sleep Timer
~
ENTERG
• Sleep Timer
ii'I,)£m: Automatically
shuts off the TV after a preset period
of time. (30, 60, 90, 120, 150 and 180
minutes).
~ To cancel the Sleep Timer, select
Off.
I
Setting the On/Off Time
~
MENU
rID ~
Setup
~
Time
~
Timer 1
~
ENTERG
• Timer 1 / Timer 2 / Timer 3:
Three different on / off
timer settings can be made. You must set the clock first.
English
17