Introduction; Unpacking; Using For The First Time - Martin Exterior 200 LED User Manual

Table of Contents

Advertisement

Introduction

Thank you for selecting the Exterior 200 LED™, a compact LED-based color-changing floodlight from
Martin™. This product features:
• Luxeon K2 high-power LEDs
• 1400 lm total LED output per fixture (balanced white 5600 K at 25° C / 77° F)
• RGBAW (red, green, blue, amber, white), and RGB color mixing, HSIC (hue, saturation, intensity, color
temperature) and HSI color management
• Diffuser filters for alternative spread angles
• 21° viewing angle (with narrow diffuser)
• DMX 512A control (3 - 5 channels depending on control mode)
• Remote configuration and addressing over the DMX data link using MUM software and a hardware
interface
• Auto-sensing power supply unit with 100 - 240 V, 50/60 Hz operating range
For the latest firmware updates, documentation, product specifications and other information about this and
all Martin Professional™ products, please visit the Martin website at http://www.martin.com
Comments or suggestions regarding this document may be e-mailed to service@martin.dk or posted to:
Service Department
Martin Professional A/S
Olof Palmes Allé 18
DK-8200 Aarhus N
Denmark

Unpacking

The following items are included with the Exterior 200 LED:
• Adjustable mounting bracket
• Narrow diffuser filter (installed)
• Medium and Wide diffuser filters (supplied separately)
• This user manual

Using for the first time

Before applying power to the fixture:
• Carefully review "Safety Information" on page 3.
• Check that the local AC power voltage is within the range listed on the fixture's serial number label.
• Install the fixture as described in this manual
Introduction
7

Advertisement

Table of Contents
loading

Table of Contents