Behringer X32 Reference Manual page 26

Sound system training and reference manual
Hide thumbs Also See for X32:
Table of Contents

Advertisement

To adjust the Monitor mix, press the SELECT button for the Monitor send and then press the SENDS
ON FADER button (just to the left), which will flash red.
Now the faders on the left side of the board can be set to feed the monitor mix – once you are done,
press the SENDS ON FADER button, it stops flashing and the board reverts back to viewing the
channel faders on the left side.
Figure 30 - Setting Monitor Send Levels for Piano, Drums and Bass (example)
If anyone asks for more of something in the monitor, just press the SELECT button above the monitor
send, press the SENDS ON FADER button and adjust the fader on the appropriate channel, then
remember to press the SENDS ON FADER button so it stops flashing and reverts back to the channel
faders.
There is no need to send any of the SERVICE channels to the monitor bus, you should ONLY send
BAND channels.
Remember to press the SENDS ON FADER button when you are done to return the left side of the
board to controlling the overall mix.
Page 24

Advertisement

Table of Contents
loading

Table of Contents