Faq; Frequently Asked Questions - Inteno XG6846 Installation Manual

WAN/EXT 1 indicator
On (Yellow) Connected to
100Mbps network
On (Green) Connected to
1000Mbps network
Off LAN not connected
Flashing Activity
WAN-indicator
On (Yellow) Connected to
100Mbps network
On (Green) Connected to
1000Mbps network
Off Not connected to a network
Flashing Activity
Power(PWR)-indicator
On (Green) Power is on
On (Red) Start up failure (please
contact your service operator)
Off Power is off
Frequently Asked
g
Questions
Detailed information on how you connect
your digital TV and telephone services can
be found in the manuals for each service.
I can't find the network outlet/LAN-
port on my computer.
Typically, the network outlet or the LAN
port is the only port on the computer
where the supplied network cable fits.
In some computers there is a built-in
telephone modem, but the contact is
smaller than the network outlet / LAN port.
I can't browse from my computer
even though I have connected to
the broadband switch to the
network outlet and my computer
to the broadband switch.
1. Check that the broadband switch
has got power (the PWR LED should
be green).
2. Make sure you have connected the
cables to the appropriate ports on the
broadband switch. The WAN LED
should be YELLOW/GREEN and
the outlet where the computer is
connected (LAN1, RED) should be
YELLOW/GREEN..
3. Do you use your own cables? Try if it
works when you use the cables that
are included in the start box.
4. Restart the broadband switch by
pulling the power plug from the
broadband switch for a few seconds
and then reconnect the power plug.
The broadband switch now needs
to update itself with your user profile.
Please give it ten minutes for this
procedure, without turning off
the power.
5. Restart the PC.
Wait a few minutes and then restart
the broadband switch. If you still can't
browse, please contact your operator
support.
XG6846
Broadband Switch
7