Setting The Telephone Line Type - Canon Laser Class 2060 User Manual

Setting the Telephone Line Type

Use this procedure if you need to change the factory-set telephone line
setting. The default setting is TOUCH TONE.
If you are unsure which setting to use, contact your local telephone
company.
1. Open One-Touch Speed Dial panel.
2. Press Data Registration.
Registration
3. Press Set twice.
Use N or M to select 9.TEL LINE TYPE.
4.
Press Set, then use N or M to select the correct telephone line type.
5.
6. Press Set to save the telephone line type.
7. Press Stop to return to standby mode.
3-12
Registering Information in the LASER CLASS 2060
Data
Set
Set
Set
Set
Stop
R E G I S T R A T I O N
1 . D A T A R E G I S T R A T I O N
D A T A R E G I S T R A T I O N
1 . U S E R S E T T I N G S
U S E R S E T T I N G S
1 . D A T E & T I M E
U S E R S E T T I N G S
9 . T E L L I N E T Y P E
T E L L I N E T Y P E
T O U C H T O N E
T E L L I N E T Y P E
R O T A R Y P U L S E
D A T A R E G I S T R A T I O N
2 . R E P O R T S E T T I N G S
1 2 / 3 1 / 1 9 9 9 F R I 1 0 : 0 0
F a x T e l S T A N D A R D
Chapter 3