Table of Contents
Advertisement
N
If you have an answering machine connected to your LASER CLASS 2060
that can carry out remote-control operations (controlling your answering
machine from a remote telephone), the security code for this function
may be the same as the two-digit ID code described above. If so, make
sure you change the LASER CLASS 2060 two-digit ID code to make it
distinct from the answering machine's security code. See pages 15-9 and
15-11 for details on changing the code (REMOTE RX ID setting).
Receiving Faxes Automatically: FAX ONLY MODE
When the LASER CLASS 2060 is set up for a dedicated line, set FAX
ONLY MODE to automatically receive documents whenever a call comes
over the fax line.
Using an Answering Machine: ANS.MACHINE MODE
Connecting an answering machine to the LASER CLASS 2060 allows you
to receive faxes and phone messages while you are out of the office.
For instructions on connecting an answering machine to the LASER
CLASS 2060, see "Connecting an Extension Phone or Answering
Machine" on page 2-20.
7-10
Receiving Faxes
If you do not hang up after pressing the two-digit ID code, the
unit beeps intermittently for a few seconds after you receive the
document. (You can turn the beeping off by disabling the
OFFHOOK ALARM in the USER SETTINGS menu. See pages
15-3 and 15-4 for details.)
The LASER CLASS 2060 assumes all incoming calls are from fax
machines sending documents. It receives the documents
automatically and disconnects all voice calls.
In FAX ONLY MODE, you can control whether or not the LASER
CLASS 2060 rings when it receives a fax call. To set this option
from the LASER CLASS 2060 operation panel, see pages 15-9 and
15-11 (INCOMING RING setting).
Chapter 7
Advertisement
Table of Contents
