Subscribe to Our Youtube Channel
Related Manuals for Havahart 5140G
Summary of Contents for Havahart 5140G
- Page 1 Fence Free Pet Containment System Model Model Model #5140G #5140G #5140G OPERATING INSTRUCTIONS...
- Page 2 • Over Correction Protection While there is no way to know how your dog will react to the introduction of the training collar, Havahart If your dog becomes “trapped” or “confused” in the signal field, this feature limits stimulation. It does this...
- Page 3 Use a coin to turn and open the battery hatch cover. Install the battery with the plus (+) side To begin using your Havahart Fence Free System, you’ll need to plan and install the system boundary wire, facing up and replace the battery hatch cover.
- Page 4 Immediately after the collar turns on the light will blink. The number of blinks will correspond to the static stimulus setting level. One blink means it is set at Level 1 - Tone Only, two blinks means Level 2 , three blinks means Level 3, etc.
- Page 5 Step 1: Start with your dog wearing the Havahart collar (turned Off) as well as a separate collar with a 6’ leash. Walk your dog playfully around the safe area for 2-4 minutes avoiding contact with the flags.
- Page 6 It may be that the wires are not properly connected, a wire is broken or nicked or the wall unit has lost its Your dog should be wearing the Havahart collar and a separate collar with 6’ leash. Turn On the collar and power source.
Need help?
Do you have a question about the 5140G and is the answer not in the manual?
Questions and answers