How To Optimize The Sound When Tv Speakers Are On; Speaker Bar; Subwoofer - Pioneer SP-SB23W Manual

HOW TO OPTIMIZE THE SOUND WHEN
TV SPEAKERS ARE ON
You should hear sound from the bar. If you don't, turn
up the volume on the bar using its volume control but-
tons. If your bar is connected to your TV, there's a very
good chance your TV speakers are also playing. It's
impossible to give specific instructions on how to turn
off the speakers for every TV, but here's a way to do it
that covers many of the TVs out there.
1. On your TV remote control, find a "menu"
or "setup" button.
2. Press this button. You should see an
on-screen menu.
3. Next, look for an option to control audio
functions and select it.
The setting to turn off your TV's internal speakers should
be here. If you can't turn off your TV internal speakers,
don't worry. To enjoy the best performance from your
bar, you'll want it to play louder than your TV.
Dimensions
Cabinet
Finish
Frequency Range
Drivers: Mid-Woofer
Drivers: Tweeter
Power Output
Inputs
Bluetooth
Voltage Inputs
Power Consumption
Power Consumption (Standby)
Power Consumption (Main Power Switch Off)
Dimensions
Cabinet
Finish
Driver
Voltage Input
Power Output
Power Consumption
Power Consumption (Standby)

SPEAKER BAR

®

SUBWOOFER

Use the following steps to adjust the volume balance
between your TV and the bar:
1. If necessary, program your bar to respond to the
volume up and down control commands of your
TV remote.
2. Turn your TV volume all the way down using the
control buttons on your TV.
3. Then, using the volume keys on your speaker
bar set the volume to a normal listening level
(do not use the remote control). After you make
these adjustments, your speaker bar should
always be louder than your TV speakers.
Then use the TV remote control to adjust the
volume as you normally do.
CUSTOMER SERVICE/TECHNICAL SUPPORT:
For assistance with basic set up, operation,
or troubleshooting, you may contact our
customer service hotline at:
1 (800) 421-1404
Hours: Monday-Friday10:30 am-7:00 pm EST
35.98" W x 4.05" H x 4.74" D
CARB2 MDF Wood
Black Ash Vinyl
45Hz - 20kHz
3" x 4 (2 Per Side)
1" x 2 (1 Per Side)
6 x 28 Watts (1kHz 1% THD @ 4 Ohms)
Toslink Optical x 1, Analog x 1
A2DP Wireless 2.4 gHz
100v - 240v
60 Watts
2 Watts Power Off/4 Watts Auto Power Off
0 Watts
9.01" W x 10.01" H x 9.01" D
CARB2 MDF Wood
Black Ash Vinyl
6.5" Woofer
100v-240v
50 Watts (50Hz 1% THD @ 6 Ohms)
60 Watts
1 Watt
11