Download  Print this page

Pre-Use Cleaning; Installing The Water Filter - KitchenAid Pro Line KPCM050 Owner's Manual

Pro line series coffee maker
Hide thumbs

Advertisement

PREPARING
THE

Pre-Use Cleaning

Wash the filter basket, basket insert, carafe, and carafe lids in hot,
soapy water, then rinse with clean water and dry. Do not use
abrasive cleansers or scouring pads. These parts may also be
washed in the top rack of the dishwasher.

Installing the Water Filter

Since most tap water is chlorinated and contains some level of
calcium, the use of a PRO LINE
®
The advanced ion-exchange water filter reduces chlorine and other
contaminants which impair coffee flavor. The filter also softens the
water, which extends the time between descalings.
The PRO LINE
®
Series Water Filter will filter approximately 25
gallons of water (60 full carafes). When a filter has reached
the end of its life, the water filter icon will appear on the
brew timer display.
Use of the water filter is optional: the coffee maker will operate
normally without it. If a water filter is not used, the filter icon will
still appear on the brew timer display as a reminder to descale the
coffee maker. To reset the icon after it appears, see page 23.
COFFEE MAKER
Series Water Filter is recommended.
FOR
The water filter is for use only with municipally treated tap water
or well water that is regularly tested for contaminants.
To Install the Filter:
1.
Remove the cartridge from its packaging.
2.
Place the filter cartridge in a separate container filled with
fresh, cool water; the cartridge should remain submerged in
the water for 10 minutes.
3.
Remove the water filter access cover from the coffee maker.
USE
Continued...
13

Advertisement

loading

  Related Manuals for KitchenAid Pro Line KPCM050