En-Bloc Dialing; Erase Options - Broadconnect IP Office 1408 User Manual

18.4 En-Bloc Dialing

By default, when you start dialing a number on your phone, the phone immediately connects to the telephone system and
starts passing the digits you dial to the phone system. You cannot correct the digits you have already dialed except by
ending the call and starting again. Also if you pause dialing for too long the phone system may think that you have
finished dialing and will attempt to connect the call using only the digits you have completed dialing so far.
En-bloc dialing allows you to compose and edit the number to dial on your phone's display before it is sent to the phone
system to be dialed.
Through the phone's menus you can select whether you want to use traditional or en-bloc dialing when making calls. Your
chosen setting is then applied whenever you are using a phone that supports en-bloc dialing.
You can enable or disable your en-bloc dialing setting through the phone's Features menu.
1. Press the Features soft key if shown.
· To access the menu during a call, press the
the Features soft key.
2. Use the up and down
3. Press the Select soft key or the OK button or the
4. Use the up and down
5. Use the left and right

18.5 Erase Options

1400 Series only
The A-menu accessed by pressing the
use the Erase menu to reset those options back to their defaults.
1. Press the MENU button.
2. Use the up and down
3. Use the up and down
4. Use the up and down
· Contacts
This options is not used as the contacts are stored by the telephone system.
· Call Log
This option is not used as your call log is stored by the telephone system.
· Options
This option is used to reset other settings set through the phone's A-menu.
· Language
This option is not used as your language selection is stored by the telephone system.
· All
Will only be applied to your A-menu options.
5. Press the Erase soft key.
6. When completed, press the Done soft key.
7. Press the Exit soft key to exit the menus.
1408, 1416 Phone User Guide
IP Office
right arrow key or press the
arrow keys to scroll the display to the option Call Settings.
arrow keys to scroll the display to the option En-Bloc Dial.
arrow keys to change the setting or use the indicated soft key.
key can be used to set a number of phone options specific to the phone. You can
arrow keys to locate the option Advanced.... Press the Select soft key.
arrow keys to locate the option Erase. Press the Select soft key.
arrow keys to select which settings you want to erase.
right arrow key.
Phone Settings: Redial Mode
PHONE key and then press
15-601040 Issue 06a (25 October 2011)
Page 129