KitchenAid 3 Speed Classic Blender Instructions Manual page 12

Ingredient Cap
Remove cap and add ingredients at
STIR or MIX speeds. When operating
at higher speeds, with a full jar or
with hot contents, stop blender and
add ingredients.
60 m l 60 m l
30 m l
30 m l
Step Start ® Feature
Step Start ® feature automatically
starts the blender at a lower speed to
prevent splattering then quickly
increases to the selected speed for
optimal performance.
Pulse Feature
Your KitchenAid
"Pulse At Any Speed" feature.
• Before operating the blender, make
sure the jar is properly assembled
(see page 7) and in place on the
blender base. Put ingredients into
blender jar and attach lid firmly.
• Press the ON pad. The red indicator
light should be blinking, showing
that the blender is activated.
• Press the PULSE pad. The indicator
light above the pad will glow,
indicating that all the speed pads
are in the Pulse mode.
To Operate Your Blender
2 liter s 2 liter s
1 liter s 1 liter s
®
blender has a
• Select a speed pad and press for
the desired length of time (a short
delay reaching the selected speed is
normal due to the Step Start
feature).
• To turn the Pulse feature off, just
press the PULSE pad again. The
blender is now ready for
continuous operation. Before
removing the blender jar, deactivate
the blender by pressing the OFF
pad and unplugging the power
cord.
NOTE: Use a rubber spatula to mix
ingredients ONLY when the blender is
OFF and unplugged. Never use any
utensil, including spatulas, in the
blender jar while the motor is
running.
10
ml ml liters
liters
10 00 10 00
1 1
75 0 75 0 3 3
4 4
50 0
50 0 1 1
2 2
25 0 1
25 0 1
4 4
®