Sensaphone BusinessSitter 1104 User Manual page 3

you intend to control higher voltages you must install the unit in an
NEC approved electrical panel or enclosure and have wiring
performed by a qualified electrician.
Switching the Output using the Keypad
To switch the output ON from the keypad:
1. Press STATUS.
STATUS
CONFIGURE
2. Press 6.
6
CALIBRATE
To switch the output OFF from the keypad:
1. Press STATUS.
STATUS
CONFIGURE
2. Press 3.
3
INTERCALL
TIME
Switching the Output over the Telephone
1. Call the Sensaphone. When the unit answers it will begin
reciting a status report. At any time during the call, press a
touch-tone. The unit will respond with "OK. " The Sensaphone
is now ready to accept touch-tone commands.
2. On your phone, press # 6 to turn ON the output. The
Sensaphone will respond "ON. "
3. Press # 3 to turn OFF the output. The Sensaphone will respond
"OFF. "
+
BusinessSitter Addendum
A-2