Specifications; Quick Reference Information - Honda GCV 160 Owner's Manual

Air Index
An Air Index Information hang tag/label is applied to engines certified
to an emission durability time period in accordance with the
requirements of the California Air Resources Board.
The bar graph is intended to provide you, our customer, the ability to
compare the emissions performance of available engines. The lower
the Air Index, the less pollution.
The durability description is intended to provide you with information
relating the engine's emission durability period. The descriptive term
indicates the useful life period for the engine's emission control
system. See your EMISSION CONTROL SYSTEM WARRANTY
(page 18) for additional information.
Descriptive Term
Moderate
Intermediate
Extended

Quick Reference Information

Fuel Type
Engine Oil Type
Carburetor Idle Speed
Spark plug Type
Maintenance Before each
use
First 5 hours
Subsequent
** Actual amount will vary due to residual oil remaining in the engine. Always
use the dipstick to confirm the actual level (see page 9)
Tuneup
ITEM
Spark plug gap
Valve clearance (cold)
EX: 0.20 ± 0.04 mm
Other specifications
14
Applicable to Emission
Durability Period
50 hours (0–80 cc inclusive)
125 hours (greater than 80 cc)
125 hours (0–80 cc inclusive)
250 hours (greater than 80 cc)
300 hours (0–80 cc inclusive)
500 hours (greater than 80 cc)
1000 hours (225 cc and greater)
Unleaded gasoline with a pump octane
rating of 86 or higher (page 9).
SAE 10W-30, API SJ or later, for general
use. Refer to page 9.
** Refill amount: 12.0 ~ 13.5 oz
(0.35 ~ 0.41 l)
1,400 ± 150 rpm
BPR6ES (NGK) (pressure washer
applications)
BPR5ES (NGK (all other applications)
Check engine oil level. Refer to page 9.
Check air filter. Refer to page 9.
Change engine oil. Refer to page 9.
Refer to the maintenance schedule on
page 8.
SPECIFICATION MAINTENANCE
0.028 ~ 0.031 in Refer to page 10.
(0.7 ~ 0.8 mm)
IN: 0.15 ± 0.04 mm See your authorized
Honda dealer
No other adjustments needed.

Specifications

GCV160
Type
Length x Width x Height
Dry weight
Engine type
Displacement
[Bore x Stroke]
* Net power
(in accordance with SAE
J1349)
* Max. net torque
(in accordance with SAE
J1349)
Oil capacity
Fuel tank capacity
Fuel consumption
Cooling system
Ignition system
PTO shaft rotation
Charging system:
BBC types
Flywheel brake types
GCV190
Type
Length x Width x Height
Dry weight
Engine type
Displacement
[Bore x Stroke]
* Net power
(in accordance with SAE
J1349)
* Max. net torque
(in accordance with SAE
J1349)
Oil capacity
Fuel tank capacity
Fuel consumption
Cooling system
Ignition system
PTO shaft rotation
Charging system:
BBC types
Flywheel brake types
* The power rating of the engine indicated in this document is the net power
output tested on a production engine for the engine model and measured in
accordance with SAE J1349 at 3,600 rpm (net power) and at 2,500 rpm (max
net torque). Mass production engines may vary from this value. Actual power
output for the engine installed in the final machine will vary depending on
numerous factors, including the operating speed of the engine in application,
environmental conditions, maintenance, and other variables.
** Actual amount will vary due to residual oil remaining in the engine. Always
use the dipstick to confirm the actual level (see page 9)
ENGLISH
Recoil start Electric start
14.4 x 13.0 x 14.2 in 14.4 x 13.9 x 14.2 in
(367 x 331 x 360 mm) (367 x 354 x 360 mm)
22 lb (9.8 kg) 26 lb (11.6 kg)
4-stroke, overhead cam, single cylinder
3
9.8 cu in (160 cm
[2.5 x 2.0 in (64 x 50 mm)]
4.4 hp (3.3 kW) at 3,600 rpm
6.9 ft-lb (9.4 N•m) at 2,500 rpm
Dry engine: 18.6 oz (0.55 l)
**Refill amount: 12.0 ~ 13.5 oz (0.35 ~ 0.41 l)
0.25 US gal (0.91 l)
1.1 l/h at 3,000 rpm
Forced air
Transistorized magneto
Counterclockwise
12 VDC, 0.15 A min. @ 2,900 rpm
12 VDC, 0.20 A min. @ 2,900 rpm
Recoil start Electric start
14.4 x 13.0 x 14.5 in 14.4 x 13.9 x 14.5 in
(367 x 331 x 368 mm) (367 x 354 x 368 mm)
27.1 lb (12.3 kg) 29.3 lb (13.3 kg)
4-stroke, overhead cam, single cylinder
3
11.4 cu in (187 cm
[2.7 x 2.0 in (69 x 50 mm)]
5.1 hp (3.8 kW) at 3,600 rpm
8.3 ft-lb (11.3 N•m) at 2,500 rpm
Dry engine: 18.6 oz (0.55 l)
** Refill amount: 12.0 ~ 13.5 oz (0.35 ~ 0.41 l)
0.25 US gal (0.91 l )
1.3 l/h at 3,000 rpm
Forced air
Transistorized magneto
Counterclockwise
12 VDC, 0.15 A min. at 2,900 rpm
12 VDC, 0.20 A min. at 2,900 rpm
)
)