Table of Contents
Advertisement
Q
UICK
card bracket can now be flipped up vertically. Place the
memory card positive-locking into the bracket. Make
sure that the memory card contacts are facing down
and that the "nose" is placed in accordance with the
marked area. The contacts of the memory card must
not get scratched or bent. Flip the bracket down and
push it in the direction of the edge of the casing until it
locks into place.
•
Insert the battery. The golden contacts on the battery
must face towards the bottom right.
Press lightly on the top end of the battery until it snaps
into place.
•
Replace the battery cover on the back of the phone and
shift it upwards until it clicks into place.
Charging the battery
•
Before starting to charge the battery, check that it has
been installed properly. Do not remove the battery while
it is being charged. This could damage the phone.
12
S
G
TART
UIDE
Helpline 0844 800 6503
(See page 90 for costs and hours of operation)
Advertisement
Table of Contents
