Motorola Multi-Room DVR Quick Start Manual page 10

Resuming playback on a connected non-DVR set-top that was
previously playing on another non-DVR set-top.
Let's assume you are watching a movie on a non-DVR set-top in your
bedroom and you decide you want to continue watching it in the den
(where another non-DVR set-top is located). Here is what you would
do:
1. While watching the content in the bedroom, press the MENU
button on the remote control. Select the Set Follow-me
bookmark icon and press OK.
2. In the den, press the B (or List) key to display the My Recordings
screen.
3. Use the arrow keys on your remote control to highlight the
content you were previously watching in the bedroom and press
OK.
4. Select the Resume Playback icon from the Playback Details
Screen.
5. Select the Follow-me bookmark position icon and press OK.
6. The playback will resume right where you left off.
Pausing live TV on your non-DVR set-top.
Let's assume you are viewing live TV and decide to resume watching
at a later time. Here is what you would do:
Press the B (or List) key on your remote to display the My Recordings
screen.
Press the PAUSE button on your remote.
To resume watching press the PLAY button on the remote.
Note: If your DVR is busy with other record functions, a confirmation
screen will appear when you try and pause live-TV or set-up a
recording from a connected non-DVR set-top. Should you chose
to continue (by pressing OK) a viewer watching TV at the DVR will
experience an interruption in program viewing.
non-DVR
non-DVR
non-DVR
10