V .
Y O U R
S U N D A N C E R
Running Light Switch
This switch controls your scooters front and rear running lights.
n Toggle the switch forward to turn on your scooters running lights.
n Toggle the switch back to turn off your scooters running lights.
Horn Button
The key must be fully inserted into the key switch for the horn to be operational.
n This button activates a warning horn.
n Do not hesitate to use the warning horn when doing so may prevent accident or injury.
Hazard Light Switch
This switch activates the 4-way flashers on your scooter.
n Toggle the switch forward to turn on the flashers.
n Toggle the switch back to turn off the flashers.
Turn Signal Buttons
n Press the appropriate turn signal button once to activate it.
n Your scooters turn signals are timed to shut off automatically.
Status LED
The status LED will alert you to electrical problems that may occur with the scooter. The LED remains constantly
lit while your scooter is on. If the scooter develops an electrical problem, the status LED will flash a code. See XI.
Basic Troubleshooting. If the status LED flashes a code other than a code listed in Basic Troubleshooting,
contact the Pride Technical Service Department by calling 1-800-800-8586.
5-Amp Fuse
The fuse helps protect your scooters lighting and tiller console systems from receiving an overload of electrical
current. The fuse used in your scooter is the same type used in automobiles. See XII. Care and Maintenance for
fuse replacement.
20
Sundancer