S I E M E N S P T E L T D
CX65 Level 2 Service Manual
Step 5
Remove the front cover using an opening tool.
Step 7
The keypad can be separated from the front cover.
Step 9
The RF board (PCB) can be seen after removing the
SAR Frame and Light Guide assembly.
Copyright © Siemens Pte Ltd.
All Rights Reserved
ICM MP CCQ ASP/ASC
Step 6
To remove the Upper cover, gently pull the cover upwards
from the side of the phone while holding firmly the lower
case as shown.
Step 8
To remove the SAR frame and Light Guide assembly from
the lower mounting frame, unscrew the 6 screws (as
indicated) with a T5 Plus screw driver (set Torque = 16
cNm).
Step 10
Separate Display module from the RF board and place it
on an ESD safe material
Page 15 of 35
Siemens Technical Support Centre
Internal Use Only