Related Manuals for Sony 3-AXIS INDOOR DOME CAMERA NTSC
Summary of Contents for Sony 3-AXIS INDOOR DOME CAMERA NTSC
- Page 1 INSTRUCTION MANUAL DNR Super High Resolution Day & Night Color Camera 3-AXIS INDOOR DOME CAMERA Please read this manual thoroughly before use, and keep it handy for future reference.
- Page 2 WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR OTHER OPENINGS ON THE EQUIPMENT. CAUTION EXPLANATION OF GRAPHICAL SYMBOL The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated "dangerous voltage"...
-
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. -
Page 4: Fcc Compliance Statement
FCC COMPLIANCE STATEMENT INFORMATION TO THE USER: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL... -
Page 5: Table Of Contents
TABLE OF CONTENTS INTRODUCTION ----------------------------------------------------------------------------------------- 1 CAMERA CONNECTION ------------------------------------------------------------------------------ 2 OSD MENU STRUCTURE ---------------------------------------------------------------------------- 6 AUTO WHITE DEFECT & LENS ADJUSTMENT ---------------------------------------------- 13 EXTERNAL DIMENSION ---------------------------------------------------------------------------- 14 SPECIFICATIONS ------------------------------------------------------------------------------------- 15 CONTENTS OF PACKAGE Installation of the camera must be performed by qualified service personnel in accordance with all local and national electrical and mechanical codes. -
Page 6: Introduction
INTRODUCTION The camera provides high-quality images using SONY 1/3” CCD and digital Signal process LSIs. Features: ● 1/3" EXview HAD CCD Ⅱ for an image of high sensitivity ● 2.8~12 mm D/N Vari-focal(DC AI) ● Digital Wide Dynamic Range (Adaptive Tone Reproduction) ●... -
Page 7: Camera Connection
CAMERA CONNECTION 1. Lens : 2.8~12mm D/N Vari-focal(DC AI) for wide area monitoring 2. Power : power source from a DC 12V or AC 24V 3. Video : BNC connector used to connect the camera to a monitor, switcher.ect. -
Page 11: Osd Menu Structure
OSD MENU STRUCTURE SETUP MENU (page 1) LENS SHUTTER/AGC LENS SHUTTER/AGC AUTO ↵ WHITE BAL AUTO↵ BACKLIGHT MANUAL MANUAL↵ PICT ADJUST MOTION DET NEXT (page2) EXIT SAVE ALL WHITE BALANCE BACKLIGHT ATW ↵ PUSH USER 1↵ USER 2↵ ANTI CR MANUAL↵... - Page 12 SETUP MENU (page 2) PRIVACY PRIVACY DAY/NIGHT DAY/NIGHT COLOR CAMERA ID ON↵ B/W↵ LANGUAGE CAMERA RESET BACK (page 1) EXIT SAVE ALL CAMERA ID NR↵ NR MODE Y LEVEL ON↵ C LEVEL RETURN LANGUAGE CAMERA RESET ENGLISH 日本語 (return the camera to factory defaults) DEUTSCH FRANCAIS...
- Page 13 LENS AUTO TYPE (DC / VIDEO) Sets the type of mechanical iris (Video lens is not supported) MODE (AUTO / OPEN / CLOSE ) Sets the type of control to be applied over the mechanical iris. SPEED (0 – 255) Sets the convergence speed of the mechanical iris.
-
Page 14: White Bal
WHITE BAL ATW (Auto Trace White balance) SPEED (0~255) Adjusts the pull-in speed of ATW. DELAY CNT (0~255) Sets the time-based hysteresis of ATW. ATW FRAME (x0.5 / x1 / x1.5 / x2) Sets the pull-in frame magnification. ENVIROMENT (INDOOR / OUTDOOR) Preset for either indoor or outdoor applications of the ATW PUSH Wide range Auto White Balance mode (AWB) -
Page 15: Motion Det
ATR (Adaptive Tone Reproduction) allows adjustment of the image to assist with widely contrasting scenes of view. LUMINANCE (LOW / MID / HIGH) Sets the extent of the luminance compression CONTRAST (LOW / MIDLOW / MID / MIDHIGH / HIGH) Sets the extent of the contrast enhancement MOTION DET DETECT SENSE (0~127) - Page 16 LEFT (NTSC:0~474 , PAL:0~468) 0 = left RIGHT (NTSC:0~474 , PAL:0~468) 474(468) = right COLOR (1~8) Sets the colors of the privacy zones. TRANSP (0.00 / 0.50 / 0.75 / 1.00) Sets the transparency of the privacy zone area if color is selected. MOSAIC (OFF / ON) Sets the mosaic function as the privacy to ON or OFF.
-
Page 17: Camera Reset
CAMERA ID Sets the camera ID to ON or OFF. A title of 52 characters per line can be applied. Use the joystick to navigate the cursor. Pushing centrally on the joystick will allow selection of that character. The arrows at the bottom allow you to move the cursor without changing the character. -
Page 18: Auto White Defect & Lens Adjustment
AUTO WHITE DEFECT Push the left button for 5 seconds and enter Auto white defect menu. Cover the lens and Enter for starting. If white defects are over 65pcs, the camera is faulty and auto defect is useless. Over 70'C Auto white defect can't be activated. LENS ADJUSTMENT (OPTIONAL VARIFOCAL LENS) Lens 2.8 ~ 12 mm... -
Page 19: External Dimension
EXTERNAL DIMENSION... -
Page 20: Specifications
MODEL NTSC Power source DC 12V / AC 24V (±10%) Power Power consumption 3.5 Watts (300mA Image sensor 1/3″ SONY EXview HAD CCD II Total pixels 1020(H) x 508(V) 1020(H) x 596(V) Effective pixels 976(H)x494(V) 976(H)x582(V) Scanning system 2:1 Interlace 15.734KHz(H) - Page 21 MODEL NTSC Power source DC 12V / AC 24V (±10%) Power Power consumption 5 Watts (450mA Image sensor 1/3″ SONY EXview HAD CCD II Total pixels 1020(H) x 508(V) 1020(H) x 596(V) Effective pixels 976(H)x494(V) 976(H)x582(V) Scanning system 2:1 Interlace 15.734KHz(H)
- Page 22 50303457A...