To install an expansion module:
1. Remove the expansion card cover for the expansion module bay.
2. Insert the expansion module into the expansion module bay.
3. Using a T10 security torque screwdriver, tighten the two screws on the sides of the expansion module to
The following figure represents the installation of the expansion module for NX-4524 and NX-6524 models:
3.2.4 Rack Mount Instructions
To install an NX series platform in a rack:
1. Attach the rack mounting brackets to the platform.
2. Attach the mounting brackets to the rack using screws appropriate for your rack's mounting holes.
NX-4500/NX-6500 Series Intregrated Services Platform