Table of Contents
Advertisement
2.4 Configuration information
Your iSCSI SAN configuration requires several static IP addresses. Complete this form and have it
available for reference during the configuration.
IP addresses needed for configuration:
Host iSCSI
Initiator
Port 1
Port 2
Port 3
Port 4
Array Target
Port 1 (eth0)
Port 2 (eth1)
Management
(Out-of-Band or
eth2)
Array Group
Management IP
(Out-of-Band)
Array Group
Management IP
(In-Band)
Switch
Out-of-Band
Management
(OOB Mgmt) Port
Switch Admin password: _________________________
Array Group Admin password: __________________________*
Array Membership password: ___________________________*
*These may be the same password – see the PS-series Group Administration guide for more
information.
http://psonlinehelp.equallogic.com/v5.1/groupmanager.htm
Host #1
Host #2
Array #1
Array #2
Host #3
Host #4
Array #3
Advertisement
Table of Contents
