Managing User Accounts; Adding A User - HIKVISION DS-7104HGHI-SH User Manual

13.5 Managing User Accounts

Purpose:
There is a default account in the DVR: Administrator. The Administrator user name is admin and the password is
12345. The Administrator has the permission to add and delete user and configure user parameters.

13.5.1 Adding a User

Steps:
1. Enter the User Management interface.
Menu > Configuration > User
2. Click the Add button to enter the Add User interface.
3. Enter the information for new user, including User Name, Password, Level and User's MAC Address.
Level: Set the user level to Operator or Guest. Different user levels have different operating permission.
•
Operator: The Operator user level has permission of Local Log Search in Local Configuration, Remote
Log Search and Two-way Audio in Remote Configuration and all operating permission in Camera
Configuration.
•
Guest: The Guest user has permission of Local Log Search in Local Configuration, Remote Log Search
in Remote Configuration and only has the local/remote playback in the Camera Configuration.
User's MAC Address: The MAC address of the remote PC which logs onto the DVR. If it is configured and
enabled, it only allows the remote user with this MAC address to access the DVR.
4. Click the OK button to save the settings and go back to the User Management interface. The added new user
will be displayed on the list, as shown in Figure 13. 6.
User Manual of Digital Video Recorder
Figure 13. 4 User Management Interface
Figure 13. 5 Add User Menu
192