ELNA eXcellence 730 Instruction Manual page 50

v
t
i i
u
b
y
i
u
u
48
v Mark the buttonhole position on the fabric and place
it under the buttonhole foot. Lower the needle at the
starting point by turning the hand wheel.
t Starting point
NOTE:
Make sure there is no gap between the slider and
front stopper, otherwise the buttonhole will be out of
position or there will be a sewing gap.
y No gap
u Starting point
i Sewing gap
b Start sewing while pulling the needle thread lightly to
the left. After sewing a few stitches, free the thread
and continue sewing.