Disassembly Instructions; Removal Of Mechanical Parts And P.c. Boards - Sanyo DP19241 Service Manual

1. REMOVAL OF MECHANICAL PARTS
AND P.C. BOARDS
CAUTION
Be careful not to remove the FFC cable forcibly, because
the FFC cable may be damaged.
1-1: STAND ASS'Y (Refer to Fig. 1-1)
1. Remove the 3 screws (1).
2. Remove the Stand Ass'y in the direction of arrow.
Stand Ass'y
1-2: BACK CABI ASS'Y (Refer to Fig. 1-2)
1. Remove the screw (1)
2. Remove the 5 screws (2)
3. Remove the Back Cabi Ass'y in the direction of arrow.
(2)
(2)
(1)
Back Cabi Ass'y

DISASSEMBLY INSTRUCTIONS

(1)
(1)
(1)
Fig. 1-1
(2)
(2)
(2)
Fig. 1-2
1-3: MAIN PCB / SIDE JACK PCB (Refer to Fig. 1-3)
1. Remove the 2 screws (1)
2. Remove the 2 screws (2)
3. Remove the Plate Jack in the direction of arrow (A).
4. Remove the Shield Jack in the direction of arrow (B).
5. Disconnect the following connectors: (CP301, CP2201,
CP2804, CP3003, CP4202 and CP7601).
6. Remove the 5 screws (3)
7. Remove the Main PCB and Side Jack PCB in the direction
of arrow (C).
(2)
(1)
(1)
(2)
(A)
Shield Jack
1-4: POWER PCB (Refer to Fig. 1-4)
1. Remove the 3 screws (1)
2. Disconnect the following connector: (CP7001).
3. Remove the Power PCB in the direction of arrow (A).
4. Remove the screw (2).
5. Remove the Operation PCB in the direction of arrow (B).
6. Remove the screw (3).
7. Remove the Holder PCB in the direction of arrow (C).
B1-1 B1-1
Plate Jack
(3)
(3)
(3)
(3)
(B)
(3) Side Jack PCB
Main PCB
(C)
(1)
Power PCB
(1)
(1)
Operation PCB
(A)
(2)
Holder PCB
(3)
(B)
(C)
Fig. 1-3
Fig. 1-4