Pairing This System With A Bluetooth Device - Sony CMT-BT80W Operating Instructions Manual

ON: to receive in AAC codec format
OFF: to receive in SBC codec format
Notes
•
If you initiate setup during BLUETOOTH
connection, the connection is cut.
•
When using an Apple product, update it to the
latest software version. For details on updating,
refer to the operation manual supplied with your
Apple product.
•
If sound is interrupted during reception in AAC
codec format, set the BT AAC menu to "OFF."
Pairing this system with a
BLUETOOTH device
Connection example
BLUETOOTH device such as a
"WALKMAN"
26 GB
Downloaded From Disc-Player.com Sony Manuals
1
Place the BLUETOOTH device to
be connected within 1 meter
from the system.
2
Press BLUETOOTH FUNCTION .
The BLUETOOTH indicator  flashes
slowly in blue.
Press FUNCTION  on the unit
•
repeatedly until "BT AUDIO" appears
in the display .
•
If the system has been automatically
connected with the BLUETOOTH
device in the past, press BLUETOOTH
 on the unit to cancel the
connection so that "BT AUDIO"
appears in the display .
3
Press and hold BLUETOOTH 
on the unit for 2 seconds or
longer.
The BLUETOOTH indicator  flashes
quickly in blue and "PAIRING" flashes in
the display .
The system is in Pairing mode.
4
Perform the pairing operation on
the BLUETOOTH device and
search for this system with the
BLUETOOTH device.
When searching has finished, a list of
the devices found may appear on the
BLUETOOTH device display.
•
This system appears as "SONY:CMT-
BT80W (Bluetooth)" or "SONY:CMT-
BT80WB (Bluetooth)" If it does not appear,
perform the procedure from step 1 again.