Advertisement
You can also download Smart Connect at any time using the Google Play™
application on your device.
Network connection is needed to download Smart Connect application.
Using SmartTags
Configuring SmartTags
When you scan a non-configured tag, a guide opens to help configure the tag the first
time you scan it. Other tags can come pre-configured with certain information or
settings. For example, a tag may be pre-configured to open a web link with
information about a certain product or service. Or it can be set to launch certain
functions on your device.
To configure a SmartTag for the first time
1
Unlock the screen.
2
Place your device close to the SmartTag so that the device's NFC detection
area touches the tag. Your device vibrates and a dialogue box opens.
3
Select Create new event and follow the instructions to add your desired
actions.
4
Edit the Event name field and tap Finish to complete the event.
5
Tap Accept in the pop-up dialogue box. Your tag is now saved in the Smart
Connect event list as a SmartTag.
Editing SmartTags
The first time you configure a tag, a guide opens to help you through the steps. After
that, you can edit your tags using the Smart Connect application.
After you create an event on a tag, only you can edit the event, but anyone with an
NFC-enabled device can read the tag. You can allow others to edit one of your
SmartTags by removing the tag from your device list in the Smart Connect
application.
To edit a SmartTag
1
From your device's main application screen, find and tap Smart Connect.
2
Find and tap Events.
3
Tap the event that you want to edit.
To delete an event from the event list
1
From your device's main application screen, find and tap Smart Connect.
2
Find and tap Events.
3
Tap the event that you want to delete.
4
Tap Delete.
This is an Internet version of this publication. © Print only for private use.
4
Advertisement
