Check Paper Setting; Recommended Print Media; Handling And Using Print Media - Brother MFC-J2720 Basic User's Manual

Chapter 2

Check Paper setting

If the Check Paper setting is set to On, the
machine displays a message asking if you
want to change the paper type and paper size
setting. This message will appear each time
you pull a tray out of the machine or load
paper in the MP Tray. The default setting is
On.
a
Press (Settings).
b
Press All Settings.
c
Swipe up or down or press a or b to
display General Setup.
d
Press General Setup.
e
Swipe up or down or press a or b to
display Tray Setting.
f
Press Tray Setting.
g
Swipe up or down or press a or b to
display Check Paper.
h
Press Check Paper.
i
Press Off (or On).
j
Press .
24

Recommended print media

2
To get the best print quality, we recommend
using the Brother paper in the table.
If Brother paper is not available in your
country, we recommend testing various
papers before purchasing large quantities.
Brother paper
Paper Type
A3 Plain
A3 Glossy Photo
A3 Inkjet (Matte)
A4 Plain
A4 Glossy Photo
A4 Inkjet (Matte)
10  15 cm Glossy
Photo
Handling and using print
media
IMPORTANT
DO NOT use the following kinds of paper:
• Damaged, curled, wrinkled, or
irregularly shaped paper
1
1 2 mm or greater curl may cause jams
to occur.
• Extremely shiny or highly textured
paper
• Paper that cannot be arranged
uniformly when stacked
• Short grain paper
2
Item
BP60PA3
BP71GA3
BP60MA3
BP60PA
BP71GA4
BP60MA
BP71GP
2
1