Brother MFC-J265W Quick Setup Manual page 4

IMPORTANT
The telephone line cord MUST be connected
to the socket on the machine marked LINE.
Note
If you are sharing one telephone line with an
external telephone, connect it as shown below.
1 Extension telephone
2 External telephone
Note
If you are sharing one telephone line with an
external telephone answering machine, connect it
as shown below.
Set the receive mode to External TAD if
you have an external answering machine.
See Choose a Receive Mode on page 7.
For additional details, see Connecting an
external TAD (telephone answering device)
in chapter 6 in the Basic User's Guide.
4
4
You must set your country so that the machine works
correctly on local telecommunication lines in each
country.
a
1
b
2
c
d
Set your country (For
Australia/New Zealand
Customer Only)
Check that the power is turned on by
connecting in the power cord.
Press a or b to choose your country
(Australia or New Zealand), and press
OK.
Set Country
Australia
New Zealand
If the LCD shows the correct country, press a or b
to select Yes, and press OK. Then go to step d.
Or press a or b and to select No, and press OK.
Then go back to step b and choose the country
again.
Australia
Yes
No
After the LCD shows Accepted for a few
seconds, the machine will restart automatically.
After the restart, the LCD shows Please Wait.