Download  Print this page

Protecting The Environment; Ec Declaration Of Conformity - Black & Decker vo1700 Instructions For Use Manual

Hide thumbs


Take the filter (37) out (fig. P).
Brush any loose dust off the filter.
Replace the filter.
Close the lid.
Replacing the filters (fig. L - Q)
The container filter should be replaced every 6 to 9 months
and whenever worn or damaged. When replacing the container
filter, the motor filter and the outlet filters have to be replaced
as well. Replacement filter sets are available from your
Black & Decker dealer.
Replacing the container filter (fig. L - O)
Proceed as described above to replace the filters.
Replacing the motor filter (fig. L & P)
Proceed as described above to replace the filter.
VO1700A/VO1800A - Replacing the outlet filter (fig. Q)
Open the cover (38).
Remove the old filter (39).
Insert the new filter as shown.
Close the cover.
VO1700/VO1710/VO1800/VO1810 - Replacing the HEPA
filter (fig. Q)
The HEPA filter reduces the amount of dust exiting the motor
housing to a minimum.
Proceed as described above to replace the filter.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
Connect the brown lead to the live terminal in the new plug.
Connect the blue lead to the neutral terminal.
Connect the green/yellow lead to the earth terminal.
Warning! Follow the fitting instructions supplied with good
quality plugs. Recommended fuse: 13 A.

Protecting the environment

Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste.
Make this product available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
Technical data
Power input
Cable length
Container size
Power input
Cable length
Container size

EC declaration of conformity

Black & Decker declares that these products conform to:
89/336/EEC, 2006/95/EC, EN 55014, EN 60335, EN 61000
Level of sound pressure, measured according to EN 60704-1:
Spennymoor, County Durham DL16 6JG,
European Community design registration no. 351606-0001
VO1700A VO1700 VO1800A
V 230
W 1,700
m 4.5
l 2.5
kg 7
V 230
W 1,800
m 5
l 2.5
kg 7
71 dB(A)
Kevin Hewitt
Director of Consumer Engineering
United Kingdom



  Also See for Black & Decker vo1700

  Related Manuals for Black & Decker vo1700

This manual is also suitable for: