Advertisement
Gigaset 8800 Handset
The Gigaset 8800 handset is used exclusively on the Gigaset 8825 system. Up to a total
of eight handsets may be added.
Handset Setup
Before using your handset, follow these steps:
2
Insert batteries
3
as shown.
IMPORTANT: Charge batteries 12 to 14 hours before using the
handset for the first time. WARNING: Use only NiCd or NiMh
“AA” rechargeable batteries. DO NOT USE ALKALINE, LITHIUM,
OR NON-RECHARGEABLE BATTERIES.
Cordless Handset Registration
The cordless handset that comes with the system is preregistered to the base station.
Additional cordless handsets need to be registered to the base station.
1
If the handset is not already on, press PWR key in the
lower right corner of handset.
2
When “Please Register” is displayed, press OK.
3
Enter System PIN and press OK (default is 0000).
4
At base station, press MENU.
5
Scroll to “System Settings” by pressing >FWD key and
then press SELECT.
6
Enter System PIN and press SELECT (default is 0000).
7
Scroll to “Mobile Registration” by pressing >FWD key and then press
SELECT.
8
When “Select Intercom Number“ is displayed on handset, scroll to
number you want to assign, and press OK.
9
When completed, you will hear a confirmation beep.
See User Manual for additional options.
Or visit our Website: www.icm.siemens.com
Visite nuestro sitio Web para obtener instrucciones en español.
1
Place cover on back
of handset and push
gently upward until it
clicks into place.
Customer Care: 1-888-777-0211
Remove protective
plastic film from
display.
4
Place handset in
charger with
display facing out.
Power key
Sold by:
http://www.TWAcomm.com
Toll Free: (877) 892-2666
Advertisement
