Set Up A Bluetooth Connection; Packet Data - Nokia 7500 PRISM User Manual

dial-up networking, SIM access, and serial port. To ensure interoperability between
other devices supporting Bluetooth technology, use Nokia approved enhancements for
this model. Check with the manufacturers of other devices to determine their
compatibility with this device.
There may be restrictions on using Bluetooth technology in some locations. Check with
your local authorities or service provider.
Features using Bluetooth technology, or allowing such features to run in the background
while using other features, increase the demand on battery power and reduce the
battery life.

Set up a Bluetooth connection

Select Menu > Settings > Connectivity > Bluetooth and from the following options:
● Bluetooth — Select On to activate the Bluetooth function.
Bluetooth is activated.
● My phone's visibility — to define how your device is shown to other Bluetooth
devices
● Search audio enhanc. — to search for compatible Bluetooth audio devices. Select
the device that you want to connect to the phone.
● Active devices — to check which Bluetooth connection is currently active
● Paired devices — to search for any Bluetooth device in range. Select New to list any
Bluetooth device in range. Select a device and Pair. Enter an agreed Bluetooth
passcode of the device (up to 16 characters) to pair the device to your device. You
must only give this passcode when you connect to the device for the first time. Your
device connects to the other device, and you can start data transfer.
● My phone's name — to set the device name for Bluetooth connections
If you are concerned about security, turn off the Bluetooth function, or set My phone's
visibility to Hidden. Always accept only Bluetooth communication from others whom
you trust.

Packet data

General packet radio service (GPRS) is a network service that allows mobile devices to
send and receive data over an internet protocol (IP)-based network.
To define how to use the service, select Menu > Settings > Connectivity > Packet
data > Packet data conn. and from the following options:
● When needed — to set the packet data connection to established when an
application needs it. The connection will be closed when the application is
terminated.
● Always online — to set the device to automatically connect to a packet data network
when you switch the device on.
© 2007 Nokia. All rights reserved.
S e t t i n g s
indicates that
43