Language
The Language option is used to change the language of the OSD menus.
1.
Select LANGUAGE in the ADJUST menu by using the Up and Down OSD controls.
1.
Change the LANGUAGE selection by using the Left and Right OSD controls (see
Figure
31). You can select the language from: English, Russian, Spanish, Italian,
French, Turkish, Chinese 1 and 2, Korean, and Japanese.
Communication
This feature is not currently supported.
Defect
When set to AUTO, the AUTO DEFECT function corrects image errors caused by defective
pixels in real time while SENS-UP occurs.
1.
Select DEFECT in the ADJUST menu by using the Up and Down OSD controls.
2.
Change the DEFECT selection by using the Left and Right OSD controls.
3.
Set DEFECT to AUTO and press SET to open the DEFECT menu (see
Figure 33
ADJUST
SHARPNESS
MONITOR
GAMMA
LSC
LANGUAGE
COMMUNICATION OFF
DEFECT
RETURN
4.
Change the WHITE THR and LUMA THR values, as needed, to increase or
decrease the amount of defects that are corrected.
5.
Select RETURN and press SET.
ADJUST Menu - DEFECT Submenu Selection
15
LCD
0.55
ON
ENGLISH
AUTO
Configuring the Camera | 29
DPC AUTO
WHITE THR
LUMA THR
RETURN
800-12004V2 - A - 01/2013
Figure
33).
15
30