Sync (Internal Synchronization) - Honeywell HD251(X) Configuration Manual

26 | HD251(X)/HD262(X)/HB273(X) Camera Configuration Guide
MOVE-XY You can change the position of the current Privacy Mask with the MOVE-XY
option (see Figure 29).
a. Use the Up or Down OSD controls to select MOVE-XY and press SET.
b. Use the Up, Down, Left or Right OSD controls to move the Privacy Mask in
the direction that you have pressed.
c. Press SET to confirm the new position of the Privacy Mask.
AREA DISPLAY ON : Activates area display. OFF: Disables the area display.
4. Repeat these steps for each Privacy Mask needed for your camera.
5. Move the arrow indicator to RETURN after completing the setup to return to
SPECIAL menu.

Sync (Internal Synchronization)

Note SYNC is always internal for camera models HD251X)and HD262(X).
For the HB273(X) camera, when the SPECIAL menu is displayed, use the Up or Down OSD
controls to access the SYNC menu (see
Figure 30
SPECIAL
CAMERA TITLE OFF

ADJUST
MIRROR
MOTION DET
PRIVACY

SYNC
RESOLUTION
RESET

RETURN
www.honeywellvideo.com
SPECIAL Menu - SYNC Submenu Selection
OFF
OFF
OFF
INT
NORMAL
NO
Figure 30).
L.L.

ADJUST
RETURN


100