Table of Contents
Advertisement
Available languages
Available languages
MAINTENANCE OF EXTERNAL
SURFACES
•
Use a polishing cloth or dry cloth to wipe off dust and dirt.
•
When the surfaces are very dirty, wipe with a soft cloth
dipped in some neutral cleanser diluted five or six times
with water, and wrung out well, and then wipe again with a
dry cloth. Do not use furniture wax or cleaners.
•
Never use thinners, benzine, insecticide sprays and other
chemicals on or near this unit, since these will corrode the
surfaces.
IN COMBINATION WITH
SPEAKERS
The frequency characteristics of the S-HS02 combined with
satellite speakers are shown below. As shown in these
figures, the low frequency range is improved.
• These special characteristics are obtained in an echoless
chamber. The effect of an additional subwoofer in an
ordinary listening room is better than the chart indicates
when positioned adequately.
Satellite speaker + Subwoofer
Satellite
FREQUENCY (Hz)
•
With playback of Dolby* Digital, establishment of a
special channel for the subwoofer is recommended; and
with playback of LFE (Low Frequency Effect: sound
effect like the rumbling of the earth, whose purpose is to
intensify the force of the video), the S-HS02 is especially
effective.
Dolby* Digital
Dolby Digital is the name of the Dolby Surround multi-
channel digital system that was developed from Dolby
Surround, as a continuation of Dolby Pro Logic Surround.
Dolby Digital is also referred to as a 5.1 channel system.
This is because it has 5 channels in the 20Hz – 20kHz
frequency range (front left and right, center, and rear left
and right) and an independent channel for the subwoofer.
The subwoofer channel is also referred to as LFE (Low
Frequency Effect).
The LFE channel is used according to individual tastes to
enhance the bass effect.
En
LINE LEVEL CONNECTION
Before making or changing the connections, switch off
the power switch and disconnect the power cord from
the AC outlet.
This connection is for a stereo amplifier or receiver
equipped with a SUBWOOFER PRE-OUT terminal.
Connect to the LINE LEVEL INPUT terminal on this unit,
using the specially provided RCA plug cord.
Stereo amplifier or Reseiver
SUB WOOFER
PREOUT
Supplied RCA plug cord
Subwoofer (Rear Panel)
LINE LEVEL
INPUT
LINE LEVEL
INPUT
AUTO
STANDBY
PHASE
OFF ON
0 180
240V
220-
230V
110-
127V
AC IN
NOTE:
When connected to the PRE-OUT terminal for surround
center channel on the stereo amplifier or receiver, the bass
is heard only on the center channel, so it will be insufficient.
Page 6
- Quick Links:
- English
- Features
- Installation
- Specifications
Hide quick links:
Advertisement
Chapters
Table of Contents
