Asus B1M E-Manual page 56

Using Ezlink to project from your input device
1. Turn on your input device then connect to the LED projector
using a USB cable.
2. Turn on the LED projector. If the Media Center does not
automatically launch, press
Select EzLink. Wait for the USB icon to appear onscreen to verify
3.
that the LED projector was successfully connected to your input
device.
From your input device, select the EZ-USB Mirror-only icon to
4.
start projecting from your input device to the LED projector.
56
on the control panel.
LED projector E-Manual