Onboard LAN
Enable or disable the onboard network interface controller.
Restore on AC/Power Loss
Select the power state ater a power failure. If [Power Of] is selected, the power will
remain of when the power recovers. If [Power On] is selected, the system will start
to boot up when the power recovers.
Good Night LED
By enabling Good Night LED, the Power/LAN LEDs will be switched of when the
system is on. It will also automatically switch of the Power and LAN LEDs when
the system enters into Standby/Hibernation mode.
Spread Spectrum
Enable Spread Spectrum to reduce electromagnetic interference for passing EMI
tests.
HDMI/DP Switch
Select to enable HDMI or DisplayPort.
42