Download Print this page

Where To Get Help; Telephone Support Services; Internet Support; Optional Accessories - Epson PowerLite Pro Cinema LS10000 Quick Setup Manual

Hide thumbs Also See for PowerLite Pro Cinema LS10000:

Advertisement

Check that your 3D glasses are charged and have not entered standby
mode. Slide the power switch on the 3D glasses to the Off position, then
back to the On position.
Press the Menu button on your remote control, select the Signal menu,
select 3D Setup, and then select 3D Format. Make sure that the Auto
option is selected.
Check that your video device and media are both 3D-compatible. Refer
to the documentation that came with your video device for more
information.

Where to get help

Manual
For more information about using the projector, click the icon on your desktop
to access the online manual (requires an Internet connection). If you don’t
have a User’s Guide icon, you can install it from the projector CD or go to the
Epson website, as described below.

Telephone support services

To use the Epson
PrivateLine
Support service, call (800) 637-7661. This service
®
®
is available for the duration of your warranty period. You may also speak with
a support specialist by calling (562) 276-4394 (US) or (905) 709-3839 (Canada).
Support hours are 6
to 8
, Pacific Time, Monday through Friday, and
am
pm
7
to 4
, Pacific Time, Saturday. Days and hours of support are subject to
am
pm
change without notice. Toll or long distance charges may apply.

Internet support

Visit epson.com/support (U.S.) or epson.ca/support (Canada) for solutions
to common problems. You can download utilities and documentation, get
FAQs and troubleshooting advice, or e-mail Epson.
Registration
Register today to get product updates and exclusive offers. You can use the CD
included with your projector or register online at epson.com/webreg.

Optional accessories

For a list of optional accessories, see the online User’s Guide.
You can purchase additional RF 3D glasses (part number V12H548006) or other
accessories from an Epson authorized reseller. To find the nearest reseller,
call 800-GO-EPSON (800-463-7766). Or you can purchase online at
epsonstore.com (U.S. sales) or epson.ca (Canadian sales).
Notices
Laser
Complies with FDA performance standards for laser products except for
deviations pursuant to Laser Notice No. 50, dated June 24, 2007.
Bluetooth Safety and Specifications
Contains Bluetooth module model: DBUB-E207
This document provides safety instructions and describes the specifications.
Read this document carefully before use to ensure your safety and product
performance.
U.S.
Contains FCC ID: BKMAE-E207
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Eps
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
Thre
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
Wha
energy and, if not installed and used in accordance with the instructions, may
purc
cause harmful interference to radio communications. However, there is no
state
guarantee that interference will not occur in a particular installation. If this
State
equipment does cause harmful interference to radio or television reception,
mate
which can be determined by turning the equipment off and on, the user is
limit
encouraged to try to correct the interference by one of the following measures:
glass
purc
Reorient or relocate the receiving antenna.
purc
Increase the separation between the equipment and receiver.
Wha
durin
Connect the equipment into an outlet on a circuit different from that to
botto
which the receiver is connected.
and
the d
Consult the dealer or an experienced radio/TV technician for help.
exch
to yo
Caution: Changes or modifications not expressly approved by the party
Cana
responsible for compliance could void the user’s authority to operate this
defe
equipment.
of th
the c
This transmitter must not be co-located or operating in conjunction with any
defe
other antenna or transmitter.
you
your
Radiation Exposure Statement:
prep
Rico.
This equipment complies with FCC radiation exposure limits set forth for an
send
uncontrolled environment. This equipment should be installed and operated
will b
with a minimum distance of 7.8 inches (20 cm) between the radiator and
prod
your body.
warr
repla
Canada
or re
Contains IC: 1052D-E207
repla
for r
This Class B digital apparatus complies with Canadian ICES-003.
sellin
assum
This device complies with RSS-210 of the Industry Canada Rules. Operation is
warr
subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
Wha
including interference that may cause undesired operation.
in th
cons
Radiation Exposure Statement:
filter
servi
This equipment complies with IC radiation exposure limits set forth for an
remo
uncontrolled environment. This equipment should be installed and operated
to be
with a minimum distance of 20 cm between the radiator and your body.
abus
by d

Declaration of Conformity

softw
or se
According to 47CFR, Part 2 and 15, Class B Personal Computers and Peripherals;
insur
and/or CPU Boards and Power Supplies used with Class B Personal Computers
carry
be id
We:
Epson America, Inc.
incur
Located at:
3840 Kilroy Airport Way MS: 3-13
Long Beach, CA 90806
DISC
Tel:
(562) 981-3840
ABO
IMPL
Declare under sole responsibility that the product identified herein, complies
WAR
with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each
AND
product marketed, is identical to the representative unit tested and found
REPR
to be compliant with the standards. Records maintained continue to reflect
the equipment being produced can be expected to be within the variation
Rem
accepted, due to quantity production and testing on a statistical basis as
brea
required by 47CFR 2.909. Operation is subject to the following two conditions:
Epso
(1) this device may not cause harmful interference, and (2) this device must
must
accept any interference received, including interference that may cause
Epso
undesired operation.
beyo
neith
Trade Name:
Epson
or da
Type of Product: Projector
inclu
Model:
H488A
parti
Marketing Name: PowerLite Pro Cinema LS10000
or in
warr
warr
the l

Advertisement

loading