VersaLogic Copperhead VL-EBX-41 Reference Manual page 14

OS Installation
CD-ROM
1. Install Memory

Insert DDR3 DRAM module(s) into SO-DIMM sockets J2 and J33 and latch them into
place.
2. Attach Cables and Peripherals

Plug the either the VGA adapter cable VL-CBR-1201 into socket J1 or the LVDS
adapter cable VL-CBR-201x into socket J32 (on the bottom of the board). Attach the
adapter cable to the display.

Plug the USB CD-ROM drive, keyboard, and mouse into on-board USB ports (J12, J13,
J15, or J16).

Plug the SATA data cable VL-CBR-0701 into a SATA socket (J3, J5, J7, or J9) and
attach the SATA hard drive to the cable.

Attach the ATX SATA power cable (VL-CBR-0401) to the ATX power supply and to
the SATA hard drive.
EBX-41 Reference Manual
VL-PS-ATX12-300A
Power Supply
CD-ROM
Drive
USB
USB
USB Keyboard
and Mouse
Figure 2. Typical Start-up Configuration
ATX
VL-CBR- 0401
VL-CBR- 0808
VL-EBX-41
J18
Copperhead
USB
VL-CBR- 0702
SATA
J1
VL-CBR-1201
(or connect LVDS to
connector J32 on
bottom side of board
using VL-CBR-201x)
Configuration and Setup
SATA
Hard Drive
VGA
8