Mail - IBM Simon User Manual

Using
E
Filer
the Filer
Mail
You can
use
the
Mail
feature to send and
receive
electronic mail (E-mail) messages.
Simon can
@nnect to
a
Lotus-- cc:Mail.- Post
Office to
send
and receive electronic
mail.
You can always
tell
how
many
messages you have by
looking at the
message list buttons on the main Mail
screen. The
Received
Messages button shows you how
many
messages
you have
in
your Received Messages
list
(sometimes called an
in-basket).
The Ready to
Send
button
shows you how many messages you
have
waiting to send (sometimes called
an
out-basket). The Saved Messages button shows
you how many
messages
you have
saved.
Setting Up
Mail
With
Mail,
you send and receive messages
by
calling a computer set up
as a cc:Mail post
office.
You don't have
to worry about
how
to set
up
a post
office,
because
your
E-mail
administrator or
service
does
that.
However,
you will not be
able to send or
receive E-mail messages until
you
set
up
the
Mail
feature in Simon. To set up
Mail,
you
need the
following
information
from your
E-mail administrator:
Your user
name
Your cc:Mail
password
The cc:Mail
post
office name
The cc:Mail post office phone
number
The cc:Mail post office modem
speed
After you get this
information, touch the Settings
button on
the main
Mail
screen. The Mail
Settings
screen
will
appear.
Enter
your cc:Mail
information
by touching
the appropriate button and using the
on-screen keyboard to type the information
exactly
as
the administrator gave
it
to
you.
The factory
setting
for the modem speed
is
1200
bps.
Do
not
change
this unless your
administrator
tells you.
To conserve Simon memory,
you can check
Receive
Only Short
Messages. When you put
a
check in
this box
by
touching it,
you will only
receive
Trademark
of
Lotus Development Corporation.
Trademark of cc:Mail
lnc.
division
of Lotus
Development Corp,
Select Card Memory
'
Ae6s
L:.=
I
te
w
F"to
----__-l
I*l
Irr*--_l
50
User's Guide
Simon
Features
51