Xd-8550/Xd-6000 (En/T - Kenwood XD-6000 Instruction Manual

To stop playback
To check the programmed tracks
To add a track to the program
1 Select the track.
Go to step 2 within 8 seconds.
2 Establish the selection.
To clear tracks from the program
Press to clear tracks from the end.
To clear all track.
7
Remote control unit only
CHECK
1 2 3
4 5 6
7 8 9
PTY
SEARCH
0 +10
P.MODE
Remote control
CLEAR
unit only
P.MODE
Auto space function (Remote control unit only)
When the SPACE key is pressed during programming of tracks,
a non-recorded space of a few seconds will be created between
tracks. By recording tracks with these spaces on tape, the search
and repeat play operations of tape using the DPSS function
(which works by searching the non-recorded spaces) can be
performed reliably.
Even when the performances of two tracks are continuous (which
occurs with classical or live recording music), the spaces will be
created if they have different track Nos.
To cancel the auto space function, press the P.MODE key or the
SPACE key again.
Track No.
Blinks
PGM MEMO EDIT RDS EON TA NEWS INFO.
C D * ) 3
AUTO DISC ALL
TUNED STEREO
MAX
Each time the key is pressed, the program No. (P-NO) and the disc No.
are displayed.
The previous display resumes in a few seconds.
Add the desired tracks to the program by repeating steps 1 and 2 for
each.
The added track number is added to the end of the existing program.
Each time the key is pressed, the last track in the program is cleared.
The track being played cannot be cleared.
The entire program contents also are erased when the disc tray is
opened.
For XD-6000
Playback of CD

XD-8550/XD-6000 (En/T)

Program No.
TP PTY TOTAL SPACE PROG. MUTE N.B.
* P - ) : 1
12
5
4
3
kHz 2
1
MHz 10
8 9
7
6
11 12 13 14 15
3 7