Normal Playback; Listening To A Source Component - Kenwood VRS-7200 Instruction Manual

Normal playback

Some preparatory steps are needed before starting playback.
RECEIVER
INPUT MODE
RCV MODE
ON/STANDBY
Turning on the receiver
1 Turn on the power to the related components.
2 Turn on the power to this receiver by pressing the ON/
STANDBY key (or the
Selecting the input mode
If you have selected a component connected to the COAX 1 (DVD),
COAX 2 (VIDEO 2), OPT 1 (VIDEO 1), OPT 2 (AUX) or DIGITAL IN
(OPTICAL) jacks, make sure that the input mode setting is correct for the
type of audio signal to be used. 8
RECEIVER key).

Listening to a source component

VOLUME %/fi
Input selector keys
1
Press the INPUT SELECTOR key (or the input selector
keys/ DVD, VIDEO 1, VIDEO 2, AUX, F.AUX, GAME, TUNER)
to select the source you want to listen to.
1 Tuner (FM/AM broadcast reception)
2 "DVD"
3 "VIDEO1"
4 "VIDEO2"
5 "GAME"
6 "FRONT AUX"
7 "AUX"
2
Start playback from the selected source.
3
Use the VOLUME CONTROL knob (or the VOLUME %/fi keys)
to adjust the volume.
INPUT SELECTOR
VOLUME CONTROL
23
EN