Digital Connections - Kenwood VRS-7200 Instruction Manual

Audio video surround receiver
Table of Contents

Advertisement

Setting up the system
Connecting video components (S VIDEO)
Use the S VIDEO jacks to make connections to video compo-
nents with S VIDEO IN/OUT jacks.
¶ If you connect a video playback component such as a VCR
through a S VIDEO cord, be sure to use a S VIDEO cord in
connection to the monitor TV.
DVD
VIDEO 2
MONITOR
IN
IN
OUT
S VIDEO
S VIDEO OUT (S VIDEO cord)
Satellite Receivers
(with S VIDEO jack)
S VIDEO OUT (S VIDEO cord)
DVD player
(with S VIDEO jack)
S VIDEO IN
(S VIDEO cord)
Monitor TV
(with S VIDEO jack)

Digital connections

The digital in jacks can accept DTS, Dolby Digital, or PCM signals.
Connect components capable of outputting DTS, Dolby Digital or
PCM (CD) digital signals.
If you have connected components with digital audio output to the receiver
with digital connection, be sure to read the "Input mode settings", "Re-
assignment of rear panel jacks" section carefully. 8™
(ASSIGNABLE)
DIGITAL IN
OPT 1
OPT 2
COAX 2
(VIDEO 2)
(VIDEO 1)
(AUX)
COAX 1
(DVD)
OPTICAL DIGITAL OUT (AUDIO)
(Optical fiber cord)
OPTICAL DIGITAL
OUT (AUDIO)
(Optical fiber cord)
COAXIAL DIGITAL
OUT (AUDIO)
(Coaxial cord)
DTS disclaimer clause
When playing DTS-encoded discs, excessive noise will be exhib-
ited from the analog stereo outputs of the CD or DVD player. To
enjoy DTS Digital Surround™ playback, this unit must be con-
nected to the digital output of the CD or DVD player.
CD player or DVD player
Component with DTS,
Dolby Digital, or PCM
OPTICAL DIGITAL OUT
Connect the analog audio signals
to the AUX jacks.
(See "Connecting video compo-
nents, audio components ". 0)
Satellite Receivers
Connect the video signal and ana-
log audio signals to the VIDEO 2
jacks.
(See "Connecting video compo-
nents, audio components ". 0)
11
EN

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents