Kenwood VR-6070 Instruction Manual page 32

Ambience effects
CS II Gain adjustment mode (CS II mode only)
CS II GAIN allows user to adjust the input gain for the Circle Surround II
processing.
1 Press the SOUND key, then press the ∧ / ∨ keys or @/# keys until
"CSII GAIN" appears on the display.
2 Use the MULTI CONTROL knob or Multi (%/fi) keys to adjust
the input gain.
• The adjustment range is from 0 to -18.
SP MUTE OPTICAL 6CH INPUT
AUTO DETECT
A B CLIP
COAXIAL ANALOG 96kHzfs
L C SW R
LFE
SL SB SR
TruBass adjustment mode (CS II mode only)
TruBass adjustment provides deep, rich bass sound to various speakers.
1 Press the SOUND key, then press the ∧ / ∨ keys or @/# keys until
"TruBass" appears.
2 Use the MULTI CONTROL knob or Multi (%/fi) keys to select
the following;
1 TruBass OFF
2 TruBass SW
3 TruBass LR
4 TruBass SW + LR
• After selecting 2, 3 or 4, TruBass speaker size and level adjustment
selection will be available.
3 For TruBass speaker selection, use the MULTI CONTROL knob
or Multi (5/∞) keys to select any of the following display;
1 TruBass LARGE
2 TruBass MID
3 TruBass SMALL
4 Use the MULTI CONTROL knob or Multi (%/fi) keys to adjust
the TruBass Level.
• The adjustment range is from 0 (Trubass OFF) to 10.
SP MUTE OPTICAL 6CH INPUT
AUTO DETECT
A B CLIP
COAXIAL ANALOG 96kHzfs
L C SW R
LFE
SL SB SR
32
EN
CINEMA EQ. DTS. DOLBY DIGITAL STEREO NEO:6
THX
ACTIVE EQ. MATRIX
Surround EX
DSP MODE DISCRETE PRO LOGIC LOUDNESS CSII
CINEMA EQ. DTS. DOLBY DIGITAL STEREO NEO:6
THX
ACTIVE EQ. MATRIX
Surround EX
DSP MODE DISCRETE PRO LOGIC LOUDNESS CSII
Display dimmer adjustment
The dimmer function lets you select the brightness of the receiver's
display. You might find this useful if you darken your room to watch
movies or listen to music.
Each time you press the DIMMER key, the display brightness
changes among the three available settings.
Select the brightness level you find most pleasing.
RDS
RTY
AUTO
L C SW
MEMO LFE
STEREO
TUNED
L C SW
L C SW
96kHz LPCM playback
The receiver is compatible with the 96kHz LPCM playback. To play a
96kHz DVD, set the listen mode to "STEREO".
• In FULL AUTO input mode the listen mode will automatically be
STEREO.
• When in DIGITAL MANUAL input mode (listen mode is not STEREO),
"96kHz LPCM" will appear in the display and no sound can be heard
from the speakers.
Press the Listen Mode or Stereo key (the listen mode changes to the
STEREO mode) to output sound from the speakers.
RDS
RTY
AUTO
MEMO
STEREO
TUNED
CINEMA EQ. DTS. DOLBY DIGITAL
SP MUTE OPTICAL 6CH INPUT AUTO DETECT
ACTIVE EQ. MATRIX
A B CLIP
COAXIAL ANALOG 96kHzfs DSP MODE DISCRETE PRO LOGIC
R
SP
A
R
SP
A
R
STEREO NEO:6 RDS
THX
RTY
Surround EX
LOUDNESS CSII
AUTO
MEMO
STEREO
TUNED
STEREO
STEREO