To Use Your Mini Chopper/Mill; To Use The Mini Processor Bowl - Kenwood MultiPro FP734 Instructions Manual

mini chopper/mill
Use the mini chopper/mill for milling herbs,
nuts and coffee beans.
blade unit
sealing ring
jar
mill lid
safety
Never fit the blade unit to your food processor
G
without the jar fitted.
Never unscrew the jar while the mini
G
chopper/mill is fitted to your appliance.
Do not touch the sharp blades – Keep the
G
blade unit away from children.
Never remove the mini chopper/mill until
G
the blades have completely stopped.
important
To ensure the long life of your mini chopper/mill,
G
never run for longer than 30 seconds. Switch off
as soon as you have got the right consistency.
The processing of spices is not recommended as
G
they may damage the plastic parts.
The appliance will not work if the mini
G
chopper/mill is incorrectly fitted.
Use for dry ingredients only.
G

to use your mini chopper/mill

1 Put your ingredients into the jar. Fill it
no more than half full.
2 Fit the sealing ring into the blade unit.
3 Turn the blade unit upside down.
Lower it into the jar, blades down.
4 Screw the blade unit onto the jar until
it is finger tight.
5 Place the mini chopper/mill onto the
power unit and turn to lock
6 Switch on to maximum speed or use
the pulse control.
hints
Herbs are best milled when clean and dry.
G
.
m u
lt i
p ro
mini processor bowl
Use the mini processor bowl to
chop herbs and process small
quantities of ingredients e.g.
meat, onion, nuts, mayonnaise,
vegetables, purées, sauces
and baby food.
mini processor knife blade
mini processor bowl
to use the mini
processor bowl
1 Fit the drive shaft and bowl
onto the power unit.
2 Fit the mini processor bowl -
ensuring the ribs on the inside
of the mini bowl chimney align
with the slots in the main bowl
chimney .
3 Place the knife blade over the
drive shaft .
4 Add the ingredients to be
processed.
5 Fit the lid and switch on.
safety
G Never remove the lid until the knife blade has completely
stopped.
G The knife blade is very sharp - always handle with care.
important
Don't process spices – they may damage the plastic.
G
Don't process hard food such as coffee beans, ice cubes or
G
chocolate – they may damage the blade.
hints
Herbs are best chopped when clean and dry.
G
Always add a little liquid when blending cooked ingredients to
G
make baby food.
Cut foods such as meat, bread, vegetables into cubes
G
approximately 1-2 cm (
When making mayonnaise add the oil down the feed tube.
G
6
(if supplied)
m u
lt i
p r
o
1 ⁄ – 3 ⁄ in) before processing.
2 4