The remote control sends an RF (radio wave) signal to the receiver. For
equipment other than the receiver, an IR (infrared) signal is sent. For the
operation of the RF remote function, see page 18 and 19 of the instruction
of the unit.
The remote control supplied with this receiver is also capable of control-
ling components from a variety of manufacturers once you register the
appropriate setup codes into the remote control unit.
Refer to "Remote operation of other components" for details about the
operations available for each component.
1 Display operation 1 key
Use this key to go back to the previous display or initial display.
2 Display operation 2 key
Gets you into and out of the preset code registration mode.
The information for setup is displayed.
4 5/∞ keys
Use these keys to select the source or setup code.
5 MOVIE, MUSIC, and TV keys
Use these keys to select the input you want to register.
6 AV POWER
Once you have entered the setup code for another component, you can
press this key to turn power to that component on or off. This lets you
confirm that you entered the code properly.
RF REMOTE CONTROL UNIT
How to use the display operation keys
To register the setup code, use the display operation 1 key, display
operation 2 key, or
Display operation 1
Display operation 2
The display operation 1 key and display operation 2 key work as the
function key displayed in the display above.
When the display goes off
The display goes off automatically when you do not operate for more than
8 seconds. In this case, press the display operation 1 key, display
operation 2 key, or 5/∞ keys.
When you are confused about what's being displayed
Press the display operation 1 key repeatedly until "Menu" appears in the
The display returns to the initial display.
Setting up the system
The display operation 1 key
Go back to the previous display.
Go back to the initial display.
Erase the internal memory.
The display operation 2 key
Enter the selected item.
Display the menu.
Go to the setup display.
Exit from the current operation.
Select the item.